We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Transfer Rod.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Transfer Rod - List of Manufacturers, Suppliers, Companies and Products

Transfer Rod Product List

1～6 item / All 6 items

Displayed results
Transfer Rod (Z-φ Axis KTS Series)

Transfer Rod (Z-φ Axis KTS Series)

Our transfer rod uses a magnetic system and is suitable for use in ultra-high vacuum environments.

This is an introduction device that transmits linear and rotational motion to samples and equipment in a vacuum from the atmospheric side. This product is recommended for transporting samples over relatively short distances (100mm to 300mm). Due to its magnetic system, it provides a complete vacuum seal with the outside, allowing for stable operation for a semi-permanent duration. It can be applied to equipment that requires linear and rotational motion installed in a vacuum. The interior of the main body is treated with electric field polishing, making it usable up to ultra-high vacuum regions. By using the stopper in the drive unit, positioning at any distance or angle is possible. As an option, a rotation stop mechanism and an extension handle can be installed. Additionally, there are specifications available for corrosive gas compatibility, so please consult us. <Common Specifications for All Three Models> Permissible Leak Rate: ≦1.33×10-11Pa·m3/sec Permissible Heating Temperature: ≦200℃ Straight Force: 3kgf Rotational Torque: 2kgf/cm Rotational Angle Scale: 30° Drive Shaft Diameter: φ6mm Connection Flange Size: ICF-34FH Drive Method: Magnetic For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices
  • Analytical Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transfer Rod (Z-φ Axis KTL Series)

Transfer Rod (Z-φ Axis KTL Series)

Our transfer rod uses a magnetic system and is suitable for use in ultra-high vacuum environments.

This is an introduction device that transmits linear and rotational motion to samples and equipment in a vacuum from the atmospheric side. This product is optimal for transporting samples over long distances (500mm to 1000mm). Due to its magnetic system, it achieves complete vacuum sealing with the outside and provides stable operation for a semi-permanent period. It can be applied to equipment requiring linear and rotational motion installed in a vacuum. The interior of the main body is treated with electric field polishing, making it usable up to ultra-high vacuum regions. By using the stopper in the drive section, positioning at any distance and angle is possible. As an option, a rotation stop mechanism and an extension handle can be installed. Additionally, there are specifications available for corrosive gas compatibility, so please consult us. <Common Specifications for All Three Models> Permissible Leak Rate: ≦1.33×10^-11 Pa·m³/sec Permissible Heating Temperature: ≦200℃ Straight Force: 6 kgf Rotational Torque: 9 kgf/cm Rotational Angle Scale: 10° Drive Shaft Diameter: φ10mm Connection Flange Size: ICF-70FH Drive Method: Magnetic For more details, please refer to the PDF materials or feel free to contact us.

  • Evaporation Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transfer Rod (Z-φ Axis KTX Series)

Transfer Rod (Z-φ Axis KTX Series)

【 Campaign for surpassing 4,000 units sold is underway 】 Our transfer rods use a magnetic system and are suitable for use in ultra-high vacuum environments.

This is an introduction device that transmits linear and rotational motion to samples and equipment in a vacuum from the atmospheric side. This product is recommended for transporting samples over long distances (500mm to 1000mm). Due to its magnetic mechanism, it achieves complete vacuum sealing with the outside and provides stable operation for a semi-permanent period. It can be applied to devices requiring linear and rotational motion installed in a vacuum. The interior of the main body is treated with electric field polishing, making it usable up to ultra-high vacuum regions. By using the stopper in the drive unit, positioning at any distance and angle is possible. As an option, a rotation stop mechanism and an extension handle can be installed. Additionally, there are specifications available for corrosive gas compatibility, so please consult us. <Common Specifications for All Three Models> Permissible leak rate: ≦1.33×10-11Pa·m3/sec Permissible heating temperature: ≦200℃ Straight pull force: 6kgf Rotational torque: 9kgf/cm Rotational angle scale: 16° Drive shaft diameter: φ16mm Connection flange size: ICF-114FH Drive method: Magnet ◎ For more details, please refer to the PDF document or feel free to contact us.

  • Evaporation Equipment
  • Sputtering Equipment
  • CVD Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transfer rod (Z-φ axis KTM series)

Transfer rod (Z-φ axis KTM series)

【Campaign for surpassing 4000 units sold is underway】 Our transfer rods use a magnetic system and can be used in ultra-high vacuum environments.

This is an introduction device that transmits linear and rotational motion to samples and equipment in a vacuum from the atmospheric side. This product is recommended for transporting samples over relatively short distances (200mm to 300mm). Due to its magnetic system, it achieves complete vacuum sealing with the outside and provides stable operation for a semi-permanent duration. It can be applied to equipment requiring linear and rotational motion installed in a vacuum. The interior of the main body is treated with electric field polishing, making it usable up to ultra-high vacuum regions. By using the stopper in the drive unit, positioning at any desired distance and angle is possible. An optional rotation stop mechanism can also be installed. Additionally, there are specifications available for corrosive gas compatibility, so please consult us. <Common Specifications for Both Models> Permissible Leak Rate: ≦1.33×10-11Pa·m3/sec Permissible Heating Temperature: ≦200℃ Straight Force: 3kgf Rotational Torque: 2kgf/cm Rotational Angle Scale: 30° Drive Shaft Diameter: φ6mm Connection Flange Size: ICF-70FH Drive Method: Magnetic For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices
  • Analytical Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transfer Rod TR Series

Transfer Rod TR Series

Transfer Rod TR Series

Transfer rod that can introduce rotational and linear motion into a vacuum with high torque due to a powerful magnetic circuit. 【Features】 ○ Bakeable with all-metal seals ○ Usable with various ultra-high vacuum devices such as MBE systems due to CF specifications ○ Installation is φ70 CF specification ○ High torque achieved through magnetic coupling of a powerful magnetic circuit ○ Enables 4-axis motion transmission into a vacuum when combined with XY mechanisms and others ● For other functions and details, please download the catalog.

  • Vacuum Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transfer Rod "TR Series"

Transfer Rod "TR Series"

Easy maintenance! It is used when rotation and linear movement are required within a vacuum device.

The "TR Series" is a transfer rod compatible with ultra-high vacuum environments. It offers a wide range of movement and easy maintenance. It is used when rotation and linear movement are required within vacuum equipment. Models such as "TR-070/500" with a linear movement distance of 500mm and "TR-070/750" with 750mm are available. It features a magnetic coupling type that utilizes samarium cobalt in the magnetic circuit. 【Features】 ■ Compatible with ultra-high vacuum ■ Wide range of movement ■ Easy maintenance ■ Used when rotation and linear movement are required within vacuum equipment ■ Magnetic coupling type utilizing samarium cobalt in the magnetic circuit *For more details, please refer to the PDF materials or feel free to contact us.

  • Other work tools
  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.